Baby Stuff Lab compares top-rated RC Servo Gears under $15 by analyzing reviews and customer feedback. You can easily choose the right one from our Editor Pick List.
Top Rated RC Servo Gears under $15
Adeept AD002 2 Pcs 90S 9G Micro Servo Motor, Metal Geared Micro Servo for RC Robot Car Helicopter Airplane Controls Boat Raspberry Pi Project
- 【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor.
- 【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction.
- 【Angle】Stall Torque: 2.0kg/cm(4.8V); Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180.
- 【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi.
- 【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is...
Miuzei 20KG Servo Motor High Torque RC Servo Metal Gear Waterproof for R/C Model DIY Car Robot, DS3218, Control Angle 270°
- ▶270° Digital Servo: built-in brush motor and stable motherboard, precise angle without deviation.
- ▶Control System: change of pulse width. Pulse range 500usec ~ 2500usec for 0° ~ 270° (90°--1166usec, 180°--1833usec).
- ▶High Performance: high quality aluminum gear equipped with double ball bearing, less noise, more stable torque. After the upgrade of RC Servo, two functions are added, which can be automatically...
- ▶Large Torque: it reacts quickly and the maximum torque is up to 22.8kg·cm (316.63oz·in) at 6.8V.
- ▶Application Fields: suitable for airboats, 1:8 / 1:10 rc cars, robots, intelligent DIY, also rigid wings, helicopters, and other RC models.
[2-Pack] Servo Motor MG995 Control Angle 180°Metal Gear Servo Waterproof Digital High Speed Torque Servo Motor for RC Airplane Helicopter Mechanical...
- Good performance digital standard servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys.
- This high-speed standard servo motor can rotate 180 degrees (90 in each direction).
- Torque at 6V 12kg/cm, 7.2V 13kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees;6.0V without load 0.13s / 60 degrees
- Connector wire length 300mm. Stable and shock proof double coreless motor, metal gear, ball bearing design,Through external adapter.
- This servo offers a full range of 180° with metal gears. Application:RC robot, airplane control, robot arm and boats. Fit for all kind of R/C toys and Arduino experiments.
JX Servo PDI-4409MG 9kg Low Profile Coreless Metal Gear Standard Digital Servo Motor for RC Car Robot Arm Helicopter Airplane Parts
- Application Fields: remote control helicopters, micro robot, robot arm and boats. ALL kind of R/C Toys
- Working frequence:1520μs / 330hz
- Motor:high quality core motor;Connector Wire Length:JR 265 mm
- Operating Speed (4.8V):0.13 sec/60°; Operating Speed (6V): 0.11 sec/60°.
- Stall Torque (4.8V):7.8 kg.cm; Stall Torque (6V):9.2 kg.cm .
WOAEIUOS 17G RC Digital Servo, High Torque Waterproof Metal Gear Servo with Servo Horn for Axial SCX24 Car Boat Model Upgrade Parts
- RC Digital Servo, made of high quality materials, which is durable, stable, fast reaction and light weight
- Lightweight 17g - The operating voltage is 4.8V~6V. And the operating speed is 0.13sec/60 degree at 4.8V and 0.11sec/60 degree at 6V
- HIGH PERFORMANCE- The servo runs with high efficiency, low noise and low power consumption.
- EASY TO USE- Metal gear can withstand higher loads, which greatly extends service life. And it is very easy to install and disassemble.
- FIT FOR: It is designed for Axial SCX24 Car, RC Boat, RC Fixed wing airplane and other RC models.
SG90 9g Micro Servo Motor : Mini Servos for RC Robot/Car/Plane Micro Servos Metal Gear with Cable for Arduino Kit (6pc)
- SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi
- Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Running angle: 180 degree
- Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band setting: 5 ms
- Amplifier Type: Analog controller. Operating Voltage: 4.8V～6.0V
- Please Note: The starting current of the motor should be greater than 1A. Comes with 1 year warranty and lifetime technical Support
WOAEIUOS 25KG RC Digital Servo, High Torque Waterproof Metal Gear Servo with 25T Servo Horn 1/10 1/12 RC Car RC Crawler Robot Boat
- Superior Material: Equipped with strong copper & aluminum gears, CNC aluminium middle shell, dual ball bearings.
- Excellent Quality: Cordless motors provide high speed, responsive, unimaginable efficiency and low power consumption.
- Waterproof Servo: Excellent waterproof performance, can adapt to different harsh environments.
- Widely Use: Compatible with 1/10, 1/12 Truck, RC Car / Robot / Boat and other remote control models.
- High Rotation: Controllable angle range from 0 to 180 degrees, excellent linearity, precision control.
KingVal Replacement 17G Metal Steering Gear Digital Servo Compatible with 1/18 RC Car Ducted Plane Fixed-Wing Robot Boat
- Locked rotor torque: 1.5kgf.cm at 4.8V; 1.8kgf.cm at 6V
- No load speed: 0.23s/60 ° at 4.8V; 0.20s/60° at 6V
- Working voltage: 4.8V ~ 6VDC
- Operating frequency: 1520 μ s / 333Hz
- Gear type: metal gear ; Motor type: DC motor
Taidda Rc Car Servo, Waterproof Durable 2.2Kg Metal Gear Waterproof Servo Remote Control Accessory for 1/16 1/14 1/12 Rc Car
- WATERPROOF STEERING GEAR: Rc Servo, RC steering gear is made of high-quality durable plastic shell, waterproof and durable, reliable and safe to use. Has good responsiveness and sensitivity
- METAL REMOTE CONTROL CAR STEERING GEAR: Servo Motor, The remote control car steering gear has excellent performance, low energy consumption, high efficiency, fast running speed, and can achieve the...
- 2.2KG HIGH TORQUE: Rc Car Steering Servo, Servo metal gear with screw has high strength, high precision and small clearance, can output up to 2.2kg torque
- EASY INSTALLATION: RC Servos, The waterproof servo is light and portable, easy to install and use, and high-quality and high-performance accessories can better upgrade the perfect performance of your...
- SUITABLE FOR: Digital Servo, The size of the RC car servo is 3 x 1.5 x 4cm / 1.2 x 0.6 x 1.6inch. Fits 1/16, 1/14 and 1/12 RC cars. A great choice for every RC lover
Last update on 2023-12-05